| HR-U(H)(A) High-Speed Precise Injection Molding Machine |
Fast responding, High Speed Injection Molding,
Stable and Smoothly |
|
|
1.High speed clamping with 5 points toggle close to beeline , extended opening stroke and shortened cylinder stroke improved efficient clamping force , and speed ratio lmprove by 1.3 times . Increase productivity with differential loop high speed cycling.
2.Box-type design on clamping platens , with CAE analysis limited deformation & perfect stress distribution；ensure the best steel intensity & strength . With auto lubricating bearings to keep the surface of platens clean.
3.Tie bars with SCM440 steel non-rigidity absorbed design improved balance.
4.With linear design injection system improve the injection stability & speed , with linear slider to control best quality and more high accuracy in structure.
5.With dual-twin cylinder design stabilized carriage movement , ensure high speed & pressure injection without material leakage.
6.Integral temperature control hydraulic oil , water and material , perfect stability.
7.Compact frame mode with detachable design , more convenient in mechanism repaired and maintenance , and conform to international security standard.
8.Accurate closed feedback control , system control with high responding time (25~40ms) , accuracy of Hysteresis & reiteration are all under 0.5%.
9.Hydraulic loop with temperature compensation stabilized pressure & flow.
10.High speed injection with accumulator improved QC stability. |
|
|
